Aseptic electroPioreactor (AEP0.2)
18 steps. Follow them in order; each step lists its parts, tools and safety notes.
- Before you start0 parts✓ checked
- Connect the platforms4 parts✓ checked
- Press the raft together3 parts✓ checked
- Raspberry Pi and HAT3 parts✓ checked
- Vial holder and XR optics13 parts✓ checked
- Pioreactor software setup2 parts✓ checked
- Check the plugin0 parts✓ checked
- Set up electrolysis13 parts✓ checked
- Test electrolysis3 parts✓ checked
- Nutrient solution8 parts✓ checked
- Calibrate the pumps2 parts✓ checked
- Ports8 parts✓ checked
- CO₂ gas train12 parts✓ checked
- Admit CO₂12 parts✓ checked
- Configure sparging and electrolysis1 part✓ checked
- Set up the CO₂ flow test3 parts✓ checked
- Calibrate CO₂ flow1 part✓ checked
- Sterilise0 parts